Belshaw Donut Robot Mark II

PreviousNext GOT QUESTIONS? Check out our FAQ page for more information. DONUT ROBOT® MARK II Automatic fryer for standard size donuts, with an option for mini donuts. Capacity 30 dozen/hour, with electric power and heat. Mark II produces consistent cake ring donuts right out of the box, and is capable of several other types of donuts (such as yeast raised, and other shapes and sizes with the proper accessories. With the mini donut option, you can make both full size and mini donuts. The Mark II is compatible with Insider Ventless and Donut Robot® Mark II systems. While the automated fryer works, you can take care of other business! There's no easier, more dependable way to make donuts. With an automated fryer, no need for turning with sticks, or lifting screens in and out of the shortening. Donuts are deposited, fried and dispensed automatically for finishing such as: sugaring, icing or glazing. With a Donut Robot® you can make donuts in front of customers or in the back of the store. - Electronic Temperature Controller - maintains tight temperature for consistent donuts. - Automatically deposits 2 donuts per conveyor row. - 'Half-speed' switch available for depositing 1 donut per conveyor row, if/when demand slows. - Capable of making a wide range of donut types and sizes with the proper accessories. - Hopper holds 10 lbs (4.5 kg) batter, volume = 10 quart (9.5 liter). - Depositor can be adjusted for smaller or larger mini donuts. - Adjustable frying time from 60 to 300 seconds. - Normally requires a ventilation and fire suppression hood indoors - Drain and valve. Drains require a hole in the fryer's supporting table. - Filtration. Choose EZMelt 18 or Filter-Flo siphon - Mini donut hopper/plunger kit (Part# MK-1502-1). - For depositing 4 mini donuts per conveyor row. Changeover takes less than one minute. Max production is approximately 944 per hour (79 dozen) at 90 seconds frying time. - 1-13/16 inch Plunger (46 mm). This large size plunger enables you to increase the size of your donuts up to 3¾ inches (95 mm) - the maximum that can fit between the bars. This plunger currently available only with North America 240V/60/1 model, Item #22635. - RS Roller-Submerger system. Enables automated production of ball donuts, cake donut holes, or loukoumades about 1½ inches/38 mm in diameter, with even frying and color.